Diathonite Evolution

• BREEAM Exemplary Level, Eurofins tested
• Thermal lag up to 12 hours through a wall
• Highly elastic for a mortar: secant modulus 742 N/mm²
• Sticks to brick, tuff, stone and wood-fibre panels
• Recyclable as an inert at end of life

Package: 18 kg (33.7 lbs)

Coverage:
• 3.7 kg/m² per 10 mm (± 10 %)
• 1.9 lb/ft² per inch (± 10 %)

Application Range:
Minimum: 15 mm (0.2 in)
Maximum per layer: 40 mm (1.6 in)

Per 18 kg (40 lb) Package:
• At 10 mm: 4.86 m² (53 ft²)
• At 20 mm: 2.4 m² (26 ft²)
• At 40 mm: 1.2 m² (13 ft²)

What is Diathonite Evolution made of?
It's a natural blend of cork, clay, and hydraulic lime — sustainably sourced and BCorp certified. No synthetic binders or petrochemicals.

Can it be used in basements or high-moisture areas?
Yes — its breathability and salt-resistance make it ideal for basements, bathrooms, and older homes with moisture issues.

How thick should it be applied?
Typically 15–30 mm, depending on insulation needs. Can be applied in multiple layers.

Can it be used on exterior walls?
Yes — but it must be protected with a compatible topcoat like Argacem or Decork.

Is it suitable for heritage buildings?
Yes — its vapor permeability makes it perfect for historic masonry that needs to "breathe" to prevent damage.

Do I need a primer?
It depends on the substrate.
Use Aquabond on smooth, non-absorbent surfaces (e.g., concrete, painted walls). Not needed on absorbent masonry.

How is it installed?
By hand trowel or spray machine. We recommend professional installation for large projects.

Is it fire-resistant?
Yes — classified as A1 (non-combustible) under EN 13501-1.