C.W.C. Stop Condense Thermal Paint

• 0.60 kg/m² covers both coats
• Dry in about 6 hours
• A third coat handles severe thermal bridges
• LEED credit contributions documented

What is C.W.C. Stop Condense used for?
It's an interior thermal paint for cold walls, pillars and thermal bridges. It holds the surface up to 5°C warmer, so condensation and mould stop forming.

Does it need a primer?
No. It goes straight onto a clean, sound surface, including old paint that's still well bonded. Concrete or masonry needs to be slightly damp when you start.

Can I seal it with Aquafloor Eco?
No. Aquafloor Eco seals the surface at µ = 1932, and CWC Stop Condense is a highly breathable finish at µ = 8.

Can I paint over it?
Yes, with a breathable water-based paint like Limepaint.

How many coats should I apply?
Two coats, the second once the first is dry (about 6 hours at 23°C). Add a third where mould or the cold spot is severe.

Is it waterproof?
No. It’s a thermal paint for interior walls; water coming through a basement wall needs WATstop.