Surfaces Without Limits
Decorkrete Mineral Microcement

Surfaces Without Limits

The finish that makes anything possible

Discover

The Craft

Applied with intention

Decorkrete Mineral Microcement
Color Chart

See It In Action

Eco-Tech Building Solutions

Decorkrete Mineral Microcement

One seamless coating for floors, walls, counters and showers. Interior or exterior. Over tile, concrete, drywall, plywood, cement board or Schluter KERDI-BOARD. Mineral-based, with depth and movement in every surface....

One seamless coating for floors, walls, counters and showers. Interior or exterior. Over tile, concrete, drywall, plywood, cement board or Schluter KERDI-BOARD. Mineral-based, with depth and movement in every surface. Exceptional workability for installers. Exceptional durability for life; weather resistant, crack resistant, beautifully resilient.

Key Features

  • Compressive strength 31.5 N/mm² at 28 days
  • Flexural strength 12.0 N/mm²
  • No mesh needed at 2 mm: elasticity is built into the formulation
  • Walkable in 12–24 hours, full cure in 7 days
  • 117 ft² per 13 kg kit

Colours shown are representative only. Actual product may vary due to screen settings and natural material variations.

$188.99

$3.24/ft² material cost (covers ~58 ft² at 2 coats)

Size

Color

In Stock
Secure checkout
Free shipping on orders $1000+
Expert support

the systems

See the Full Picture

Every great finish starts with the right foundation. Explore the complete systems to understand how each layer works together—then build your bundle with confidence.

No grout lines, no joints—just continuous, flowing surfaces that make spaces feel larger and more refined.
Apply directly over existing substrates—tile, concrete, drywall, plywood, cement board, and more.
Developed and manufactured by Diasen Italy, leaders in bio-based building materials for over 40 years.

Complementary Products

These products pair perfectly with your selection

Grip Primer

Grip Primer

Grip Primer is a one-component, water-based resin primer with adhesion-promoting aggregates.

$95.99

View →
WATstop

WATstop

Liquid Waterproofing for the most demanding environments.

$206.99

View →
D20

D20

Water-based acrylic primer to prepare Decorkrete for clear coat.

$68.99

View →
Aquafloor Eco

Aquafloor Eco

Water-Based Polyurethane Sealant for Microcement.

$89.99

View →
Ardex X5™

Ardex X5™

For filling joints, seams, or large grout lines before applying microcement.

$49.99

View →
Diaseal Strong

Diaseal Strong

For filling expansion joints and small cracks or seams where materials meet.

$35.99

View →

Technical Details

Specifications

Technical Performance

Product specifications

Technical Documents

5 documents

Certifications

5 certifications

Key Features

Product highlights

Application

How to apply

Coverage & Yield

Application rates

FAQs

Common questions

Product Brochure

Download PDF

Technical Performance

Sizes 6.5 kg kit, 13 kg kit
Yield 1.20 kg/m²
Thickness 2 mm (2 coats)
Coverage (imperial) 117 ft² / 13 kg kit
Coverage 10.83 m² / 13 kg kit
Working time Initial set 30 min · work time 60 min at 20°C or cooler
Between coats 4–6 hours
Walkable after 12–24 hours
Full cure 7 days
Application temperature +5°C to +30°C
Shelf life 12 months
Compressive strength (28 days) 31.5 N/mm²

Technical Documents

Certifications

Key Features

  • Compressive strength 31.5 N/mm² at 28 days
  • Flexural strength 12.0 N/mm²
  • No mesh needed at 2 mm: elasticity is built into the formulation
  • Walkable in 12–24 hours, full cure in 7 days
  • 117 ft² per 13 kg kit

Application

How to Apply Microcement

  1. Prepare the Surface
    Make sure the surface is clean, stable and free of dust or oils. Fill grout lines deeper than 3 mm and plywood seams with Ardex X5 first.
  2. Prime or Seal
    - Use WATstop on concrete and in wet areas like showers: 1 kg/m², or 2 kg/m² on damp concrete (5% moisture or more) and concrete in wet areas
    - Use Grip Primer on drywall, cement board, painted walls, plywood, metal, laminate and dry-area tile
  3. Apply Decorkrete
    Trowel on two coats, 2 mm in total, 4–6 hours apart. Start within 24–48 hours of the last WATstop coat, never later than 48 hours.
  4. Sand
    Wait 24 hours after the second coat, then sand with 80–120 grit, vacuum, damp-wipe and let it dry.
  5. Apply D20
    Roll on one coat of D20 at 0.15 kg/m² and let it dry about 3 hours.
  6. Seal the Surface
    Apply Aquafloor Eco in three coats, 2 hours apart, the first diluted 30% with water. It is walkable after 24 hours; keep water and detergents off it for 5–7 days.

For a full application guide for showers, see our How To Document for applying microcement to interior surfaces .

Coverage & Yield

Coverage: 0.6 kg/m² per coat × 2 coats recommended

Package Covers Price Cost per ft²
6.5 kg kit ~58 ft² (5.4 m²) $188.99 $3.24/ft²
13 kg kit ~117 ft² (10.8 m²) $344.99 $2.96/ft²

Figures are estimates for planning — actual coverage varies with substrate texture, application method, and technique.

Frequently Asked Questions

Can I get samples of the product to test out before buying a full kit?

Yes, get in touch through our Contact Us page to order samples and swatches.

How much does one kit cover?

6.5 kg kit: 5.42 m² (58 ft²)

13 kg kit: 10.83 m² (117 ft²)

Can I get colour swatch samples so I can see what it looks like in real life vs. on my screen?

Yes, get in touch through our Contact Us page to order samples and swatches.

Can microcement be installed over top of Schluter (or similar) waterproofing products?

Over Schluter KERDI-BOARD, yes, with WATstop on the board in wet areas. Over KERDI sheet membrane and other flexible tile membranes, no: they're made for jointed tile, and a jointless microcement skin cracks over them. In our system, WATstop is the waterproofing layer.

How thick is Decorkrete applied?

Application is a total thickness of 2 mm in two coats (about 1 mm each coat)

Where can microcement be applied?

Microcement can be used on floors, walls, showers, countertops, tables, fireplace surrounds, range hoods, backsplashes and more.

For all application fields see "Suitable Substrates" below.

What does the full system entail?

The Decorkrete system is four steps.

  1. Primer: Grip Primer, or WATstop on concrete and in wet areas
  2. Decorkrete Mineral Microcement (2 coats)
  3. D20 Fixative (1 coat)
  4. Aquafloor Eco Sealant (3 coats)

Full installation instructions are available for wet rooms here and for dry areas here.

Do you have any locations/outlets in my area?

Yes, we have a warehouse/showroom in Regina, Saskatchewan, Canada where you can make an appointment to come in and see our products. See our Contact Us page page for our address and to make an appointment.

If not, can you ship to me?

Yes. We offer free shipping across Canada on orders over $1,000. Please see our Shipping Policy for more.

Product Brochure

  • Decorkrete Mineral Microcement Brochure

    Download

Need Expert Guidance?

Our team is here to help with product selection and technical questions.

Share Your Experience

Be the first to share your project story. Your experience helps others on their journey.