Documented
Certifications & Standards
Green building programs certify buildings; the materials feed the credits. Every claim on this page traces to a test report, attestation, or declaration you can open.
The Certification Library
Tap a card for the products that carry it and the documents that prove it.
Emissions & Air Quality
Indoor Air Comfort (Eurofins)
Eurofins seals a finished product in a test chamber and measures what it releases into room air. Gold is the strictest level. Aquabond, the Decork paints and Acriflex hold Gold; the Diathonite line passes the standard level.
C
CDPH Standard Method (California)
The California Department of Public Health emissions method, the pass North American specifiers ask for on interior products. Eurofins tested the Decork, Diathonite and Acriflex lines.
French VOC Class A+
France grades construction products from A+ to C for indoor emissions and prints the grade on the label. The Eurofins reports state class A+, the lowest-emission grade, for the tested lines.
Blue Angel
The German federal environmental label. Compliance is stated inside the Eurofins reports for the tested lines: DE-UZ 12a for coatings and DE-UZ 113 for thermal insulation.
E
EMICODE EC1 Plus
The very-low-emission class for installation products. Acriflex Rapido and Fybro carry it.
Products that carry it
Green Building Ratings
LEED
LEED is the most used green building rating system in North America. Eurofins attests the low-emitting materials credit for the Diathonite and Decork lines, and per-product charts map LEED credit contributions for the microcement system products.
WELL v2
WELL rates buildings on occupant health. The credit charts map each product's contribution to the material restriction and optimization features.
BREEAM
The UK-origin international rating system. Eurofins states Exemplary Level compliance on VOC emission and content for the Decork line; the Diathonite and Acriflex reports list the BREEAM International and BREEAM-NOR emission criteria.
Environmental Product Declaration
An EPD is a third-party verified life-cycle record under ISO 14025 and EN 15804: raw materials, manufacturing, use and end of life. Diasen's EPD S-P-06875 covers the decorative line.
Fire Performance
F
Fire Classifications
Classification reports from accredited fire labs. The Diathonite line is Euroclass A1, non-combustible, confirmed by two independent labs. The Decork finish classifies B-s1,d0 on non-combustible substrates. Ultragum holds Broof(t4) for flat roofs. Thermactive tested ASTM E84 at flame spread 0, smoke 10.
Manufacturer & Compliance
Certified B Corporation
Diasen, the manufacturer behind these products, is a Certified B Corporation: audited by B Lab against binding standards for social and environmental performance. Everything we carry from them comes out of that certified operation.
ISO Management Systems
Diasen runs three certified management systems: ISO 9001 for quality, ISO 14001 for environmental management and ISO 45001 for worker health and safety.
CE and UKCA Marking
Products carry CE and UKCA marking under their harmonized standards, each backed by a Declaration of Performance. The DoP numbers are printed on every product's technical data sheet.
Need documentation for a submission?
Specifying for LEED, WELL, or Passive House? We'll help you pull the right documents for the assessment.
Need these documents in a spec?
We build spec packages on request, and samples ship for material verification.
