Both! Our cork paints are an excellent choice both indoors and out.

Decork products can be applied with a texture gun, trowel or roller.

Yes! Decork thermal cork paints are the only cork paints on the market that can be rolled onto surfaces. Decork products can also be sprayed like traditional cork coatings.

No, much or cork's structure is comprised of air making extremely light. Additionally, cork can be applied over almost any surface eliminating the need to remove existing substrates.

There are many factors to take into consideration. Our kits include all the products you need for your job and will calculate the cost based on your square footage.

Cork can significantly enhance both the R-value and U-value of a structure. Firstly, its high R-value comes from its cellular structure filled with air pockets, which resist heat flow, making it a potent insulator. Applying cork as an additional layer to your walls, roofs, or floors can thereby increase the R-value, helping to maintain a more consistent indoor temperature and reduce energy costs. As for the U-value, which indicates the rate of heat loss of a material, spray cork can aid in decreasing this value, thanks to its insulative properties. A lower U-value signifies better insulation and less heat loss, which is what spray cork achieves by forming a barrier that minimizes thermal bridges and gaps where heat can escape. Thus, using Decork can optimize your building's energy efficiency by improving both its R-value and U-value.

Cork is highly resistant to dirt and can often be wiped off with a soft cloth or sprayed with a hose (exterior). If you are applying Decork thermal cork paint in a very high traffic area we recommend sealing the surface with Auqafloor Eco for greater resistance to dirt and scratches. Our custom kits can get you the right product for your job.

Decorkrete is a mineral decorative coating combining water-based resins and innovative additives to enable high work-ability and great aesthetic effect. The product has very good weather and abrasion resistance and excellent compressive strength. It can be used outdoors and indoors, on walls, floors, furniture and tiled surfaces. It creates perfectly smooth, modern, minimalist decorative effects.

Decorkrete is applied by trowel in two layers with a total thickness of only 2 mm.

Yes! In fact, our microcement kits can be used in bathrooms, on shower surrounds or even to build a pool.

No. Microcement is not slippery and the application of Aquafloor Eco as a sealant further decreases slip on any Decorkrete surface.

Yes, once fully cured the Aquafloor Eco used to seal Decorkrete surfaces is 100% safe.