Bold features, refined finish
Fireplaces & Range Hoods
Transform your fireplace surround or kitchen range hood into a striking focal point with seamless microcement.
Click To Build Your SystemThe System
Layer By Layer
Each layer serves a purpose. Together, they create something greater—a system built for performance, revealed in beauty.
- Your substrate
Metal, drywall, concrete, tile, cement board or plywood. Shown here for drywall; the builder adjusts the stack to yours.
- 1Grip Primer1 coat
One coat evens out the drywall's absorption and gives it the grip the first Decorkrete coat needs.
- 2Decorkrete2 coats
The hero product of every microcement system. Two hand-trowelled coats with your choice of colour, and the trowel work gives each surface a pattern of its own.
- 3D201 coat
One coat on the sanded Decorkrete evens out absorption so the sealer goes on smooth.
- 4Aquafloor Eco3 coats
The final protective layer. Three matte coats keep your system looking seamless for years to come.
Color Selection
Find Your Perfect Tone
Browse our palette and imagine the possibilities. When you're ready, build your complete system below.
S21
S25
S26
TB2
Natural
T22
System Builder
Get exactly what you need for your project - no guesswork.
1. Pick your project and substrate. The builder knows which products each system needs.
2. Enter your area. It calculates exact quantities, pack sizes, and your total — with the price per square foot.
3. Take it your way. Add the whole system to cart, request a written quote, or open the installation guide built for your exact project.
1 What are you working on?
2 Substrate Condition
3 Project Size
Resources
Technical Resources
Download the technical data sheet for every product in the system — application, substrate prep, and coverage included. Your project-specific installation guide comes from the System Builder above, or build one in the Knowledge Hub.
Technical Data Sheets
6 documents
Installation Guides
1 document
Safety Data Sheets
2 documents
Color Charts
1 document
Technical Data Sheets
Installation Guides
-
Installation Guides — Knowledge Hub
Open
Safety Data Sheets
Color Charts
-
Decorkrete Color Chart
Download
Need Expert Guidance?
Our team is here to help with product selection, technical questions, and project planning.
FAQ
Common Questions
Everything you need to know about microcement before starting your project.
The surround, the chimney breast and the wall it lives on. The firebox interior is the firebrick's job and stays that way. Everything the room sees, the seamless finish covers; everything the flame touches keeps its purpose-built materials.
Yes, hood exteriors are one of the best uses of the system. The finish wraps the shape as one piece, so a boxed-in hood reads as a single sculpted form instead of drywall with corners. Cleaning is a wipe of one smooth surface.
Curves are where trowel-applied finishes beat sheet materials. The system follows the shape that exists, arches and radius corners included, without seams or cut lines. If the substrate is sound, the form is welcome.
A surround's day-to-day warmth is well within a cement system's comfort. The discipline is the same as any masonry finish: full cure, 7 days, before the first fires of the season, and let the system warm gradually.
Microcement can be applied to virtually any stable surface including concrete, tile, drywall, plywood, and existing countertops. The surface must be clean, solid, and properly primed. Our Grip Primer ensures excellent adhesion to most substrates.
Yes, when properly sealed with our Aquafloor Eco sealer. This makes it perfect for showers, bathrooms, kitchens, and even swimming pools. The sealer creates an impermeable barrier that protects against water damage.
The complete microcement system is only 2-3mm thick. This means you can apply it over existing surfaces without significantly raising floor heights or affecting door clearances.
While experienced DIYers can achieve good results, microcement application does require skill and attention to detail. We offer training and support for DIY projects. Our System Builder includes everything you need with detailed instructions.
A typical bathroom or small project takes 4-5 days to complete, including proper curing time between coats. Larger projects may take longer. The process includes primer, base coats, finish coats, and sealer - each requiring drying time.
Decorkrete is available in 6 standard colors. Custom color matching is also available for specific project requirements.
