Polites 80

Eco-Tech Building Solutions

Polites 80

Polites 80 is an alkali-resistant fibreglass mesh for reinforcing skim coats over Diathonite plasters. Embedded mid-thickness while the coat is fresh, it distributes shrinkage and thermal stress to prevent cracking....

Polites 80 is an alkali-resistant fibreglass mesh for reinforcing skim coats over Diathonite plasters. Embedded mid-thickness while the coat is fresh, it distributes shrinkage and thermal stress to prevent cracking. Tensile strength is above 700 N per 5 cm in both directions, and the 4.0 × 4.2 mm stitch is sized to the Diathonite grain. Use it wherever micro-cracks exist or stress concentrates.

Key Features

  • Alkali-resistant fibreglass
  • Elongation at break 3.5%
  • 10–15 cm overlap detail
  • No drying time
$219.46

Size

In Stock
Secure checkout
Free shipping on orders $1000+
Expert support

Technical Details

Specifications

Technical Performance

Product specifications

Key Features

Product highlights

Coverage & Yield

Application rates

FAQs

Common questions

Technical Performance

Sizes 50m
Yield 1.10 m²/m² (mesh area per surface area, allowing 10–15 cm overlap)
Overlap At least 10–15 cm (3.94–5.90 in) at joints
Roll 1 × 50 m (50 m² per roll)
Roll weight 4 kg (6.62 lb) per roll
Mesh aperture 4.0 × 4.2 mm
Fabric weight 80 ± 5% g/m²
Thickness 0.30 ± 5% mm (average thickness of fabric)
Tensile strength (warp) > 700 ± 5% N / 5 cm
Elongation at break 3.5 ± 5%
Loss through calcination 16 ± 5%
Alkali resistance Alkali resistant (qualitative; no test standard cited)
Application temperature +5°C to +35°C (ambient and support)
Shelf life 24 months (time to storage)

Key Features

  • Alkali-resistant fibreglass
  • Elongation at break 3.5%
  • 10–15 cm overlap detail
  • No drying time

Coverage & Yield

Yield: 1.10 m²/m² (mesh area per surface area, allowing 10–15 cm overlap)

Overlap: At least 10–15 cm (3.94–5.90 in) at joints

Thickness: 0.30 ± 5% mm (average thickness of fabric)

Figures are planning estimates; actual use varies with substrate texture, application method and technique.

Frequently Asked Questions

What is Polites 80 used for?

Polites 80 is a fiberglass reinforcement mesh embedded in skim coat systems to prevent cracks and micro-fissures. It distributes the stress that shrinkage puts on the skim coat.

Do I need to use mesh on all plastered surfaces?

Not on every surface. It must go in wherever micro-cracks exist or stress concentrates, and it's always recommended in an Argatherm skim coat. On plasterboard, the Argatherm + Polites 80 + Argatherm sandwich is required.

How much overlap is required?

Maintain a minimum 10-15 cm overlap at all joints where mesh pieces meet.

How is Polites 80 applied?

Apply in a sandwich system: first layer of plaster, embed mesh in fresh plaster ensuring no bubbles or curls, then apply second layer fully embedding the mesh. The mesh must be completely covered with no exposed areas.

Can it be used with products other than Diathonite?

Yes. While optimized for Diathonite systems, Polites 80 can be used with other skim coats and liquid waterproofing systems. Always follow the technical guidelines of the coating product being used.

Is it alkali-resistant?

Yes. Polites 80 is alkali-resistant fibreglass.

How do I store unused mesh?

Store in well-ventilated areas, protected from direct sunlight, water, and frost. Keep at temperatures between +5°C and +35°C. Shelf life is 24 months in original packaging.

Need Expert Guidance?

Our team is here to help with product selection and technical questions.

Share Your Experience

Be the first to share your project story. Your experience helps others on their journey.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)